The Elecro Vulcan swimming pool heater is manufactured from top quality components and materials at the Elecro Engineering works in Hertfordshire, England.
Designed for residential and small commercial pools
Salt water compatible
Easy installation, supplied complete and fully wired with all controls
Premium titanium heating elements for reliability
Choice of digital or analogue control
Flow switch automatically shuts off heater when there is no water flow
Safety cut-out automatically shuts off heater in the unlikely event of overheating
Uniquely coiled heating elements to eliminate mineral deposits
99.9% operational efficiency throughout extensive product life
High quality design, built in the UK, to provide reliable and long-lasting products
No maintenance required
The Elecro Vulcan heaters are supplied with hose tail adapters for connection to flexible pipework. Construction consists of a flow tube which is fitted with Inlet and Outlet mouldings manufactured from specially formulated polymer alloy material. Universal ABS unions are provided to allow solvent weld connection to the inlet and outlet pipe work. The outlet moulding accommodates a reversible flow switch with a gold tipped reed, and Titanium fulcrum pin. The heater is supported on two swivel feet; these can swivel to permit either wall or floor mounting. NB You will need to supply a hose for connection between your pump and the heater. Many customers simply cut a short length of hose from their existing hosing to use as a connector between the pump and heater.
The Elecro Vulcan swimming pool heaters come fully equipped and pre-wired including a super sensitive flow switch, that allows safe coupling to most above ground pools. Please check the technical page of the manufacturers for information on connectivity to your pool before purchase. Please use the link - http://www.elecro.co.uk/support-swimming-pool-heaters - The connections supplied with your Elecro heater are a stepped 1¼" BSP & 1½" BSP (British Standard Pipe). If your Intex pool uses 1.5" hoses with threaded nuts you may wish to buy 2 x Adapter B's (part 10722) and a piece of 1.5" hose (part 11010) which are available from John Adams in the UK to make a sealed connection. It is also possible to make the connection to the 1½" (38-mm) part of the hosetail using 2 jubilee clips & silicone sealant at each side of the heater.
The heater requires only final connection to a mandatory separate RCD. No pump interlock is required. All heaters come fitted with 1.5'' BSP female threaded adapters for connection to all pipework.
The desired pool temperature can be easily set on the Vulcan heater using the panel-mounted thermostat dial in the case of the analogue model, in respect of the digital model by using the touch buttons, resulting in the temperatures being displayed on the LCD screen. Over-temperature protection is provided by the thermal cut out (manual reset).
Specifications of the Elecro Vulcan Swimming Pool Heater
- Power supply: 230V single phase or 400V three phase
- Flow requirements:
- Minimum flow 2-kW to 6-kW = 1m3 (1000 litres) per hour, 9-kW to 24-kw = 4m3 (4000 litres) per hour
- Maximum flow:- 17m3 (17,000 litres) per hour
- Heating Elements: Titanium, high MgO compaction.
- Flow tubes: BS 316 Stainless Steel
- Control thermostat (Analogue): 0 > 40ºC (1ºC differential)
- Control thermostat (Digital): 0 > 40ºC (0.5ºC differential)
- Safety thermal cut out: 55ºC (manual reset)
- Flow switch: Gold tipped reed switch with Titanium fulcrum pin
- Wiring: High temperature, silicone sheathed, multi-strand copper conductors
- Seals: Special formula high temperature polymer
- Water connections: 1½" BSP female thread supplied with 1½" to 50mm ABS unions
- Working pressure: 4 barg maximum Mounting: Floor or wall mounting
Elecro Engineering are considered one of the leading international manufacturers and specialists in the field of swimming pool water heating. Based in the UK and established over 17 years ago, Elecro has rapidly grown to a renowned and sought after brand in the industry.
With the aim of providing the highest quality equipment for the heating and treatment of swimming pools, this has quickly evolved into other markets such as aquatic, tropical marine and bespoke projects, such as building reaction chambers and large heat exchangers.
The company was originally formed by Roland May who, an engineer by trade, came up with the idea of building a heater in order to heat his children’s splasher pool. Very quickly interest from neighbouring houses arose and a business idea was born. With a few facility upgrades and a growing team of talented and enthusiastic staff, Elecro now export to over 60 different countries across the globe.
The Elecro team have been involved in the design, development and manufacture of thousands of pool and aquatic heating systems worldwide. Much of the company success is owed to their dedication to constant research and development, ensuring unparalleled product durability, safety and reliability.The Elecro range is built to exacting standards, consisting of the highest quality materials and components.
The choice for pool and aquatic professionals throughout the world, Elecro maintain a loyal and dedicated partnership with their customers striving to offer a stress free service, short lead times and quality, long-lasting products.
Elecro's company culture exudes passion for the industry, passion to provide the best products and relentlessly seek perfection.
Our dedicated staff are experts in their fields and are carefully selected due to their high level of competence.
We pride ourselves on manufacturing superior products using high quality components, coupled with a supportive, hassle-free customer service.
We believe that business should be done in a fair, honest and transparent way.
FREE DELIVERY - This item is despatched to be delivered within 7 working days to mainland UK. Other areas will have a delivery surcharge (dependent on the postcode) added automatically during checkout.
We're sorry we can't ship directly to the rest of the world but we are happy to liaise with a UK freight forwarder to arrange delivery overseas. To do this simply enter your freight forwarder's details in the delivery address at checkout. If you have any queries please contact us.
We can also deduct the VAT from our prices if you are a non-EU country.